Electronic Flat Iron Energy Saver

In: Science

Submitted By ekim14
Words 1909
Pages 8
Bulacan State University
Bustos Campus
Bustos, Bulacan

EFIES
(Electronic Flat Iron Energy Saver)

Submitted by:
Joseph Matic
Mike Velar Leonardo
Marvin Lopez
Submitted to:
Ms. Janice Viloria

Abstract This study was conducted to unlock the problem regarding too much energy use of some home appliances. Flat iron is one of the most high energy consuming home appliances. Flat irons are the third most electric consuming common house appliance. The spring from the rice cooker, some outlets and tools were used and combined to make the set up. Testing the energy saver flat iron followed. Results show that it is more convenient to use the energy saver flat iron than an ordinary because it consumes less energy and as effective as unlike the ordinary one.

Primarily, the study aimed to produce an energy saver flat iron. It also aimed to make a machine which is convenient and consumes less electricity. This project will help the community and individuals to avoid consuming too much energy. This will also benefit the resources around us because we can conserve and lessen the use of natural sources of energy.

Table of Contents
Title page ……………………………………………………………………………….… 1
Abstract ……………………………………………………………………..…………….. 2
Table of Contents …………………………………………………………………………. 3
CHAPTER I THE PROBLEM AND ITS BACKGROUND A. Introduction ………………………………………………………………….……. 4 B. Statement of the Problem ………………………………………………………..… 4-5 C. Significance of the Study ……………………………………………………….…. 5 D. Scope and Delimitation ………………………………………………………….… 5
CHAPTER II THEORETICAL FRAMEWORK A. Review of Related Literature ………………………………………………....…… 6 B. Review of Related Study ……………………………………………………….…. 7 C. Conceptual Framework …………………………………………………….....…… 7 D. Hypothesis of the Study ……………………………………………………..…….. 8
CHAPTER III METHODOLOGY A. Materials…...

Similar Documents

Iron and Steel Industry

...Analysis of Indian Iron and Steel Industry Table of Contents 1Introduction.......................................................................................................... 3 1.1Varieties of Steel................................................................................ ...............5 1.2Production Technology .....................................................................................6 1.3Components of the cost of production..............................................................7 2The Global Steel Industry.....................................................................................9 3The Structure of Indian Steel Industry...............................................................10 3.1Factors that attribute to the Revival of the Indian Steel Industry....................11 3.2Consumption of Steel in India.........................................................................16 3.2.1Top Five Companies.....................................................................................16 3.2.2Bottom Five Companies..............................................................................25 4Quantitative Analysis.........................................................................................32 4.1Ratio Analysis................................................................................................. .32 5Qualitative Analysis.........................................................................................

Words: 15829 - Pages: 64

Electronics

... Electronics FOR DUMmIES by Gordon McComb and Earl Boysen ‰ TEAM LinG - Live, Informative, Non-cost and Genuine ! Electronics For Dummies® Published by Wiley Publishing, Inc. 111 River Street Hoboken, NJ 07030-5774 Copyright © 2005 by Wiley Publishing, Inc., Indianapolis, Indiana Published by Wiley Publishing, Inc., Indianapolis, Indiana Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600. Requests to the Publisher for permission should be addressed to the Legal Department, Wiley Publishing, Inc., 10475 Crosspoint Blvd., Indianapolis, IN 46256, (317) 572-3447, fax (317) 572-4355, e-mail: brandreview@wiley.com. Trademarks: Wiley, the Wiley Publishing logo, For Dummies, the Dummies Man logo, A Reference for the Rest of Us!, The Dummies Way, Dummies Daily, The Fun and Easy Way, Dummies.com, and related trade dress are trademarks or registered trademarks of John Wiley & Sons, Inc. and/or its affiliates in the United States and other countries, and may not be used without......

Words: 127080 - Pages: 509

Market Analysis: Chi Flat Iron for Men

...Danielle Sone Mktg 370-03 12-26-13 805950938 Chi Flat Iron for Men Every morning men and women around the world are graced with the inherent ability of waking up with bed head. Bed head is hair that has been tousled from sleep. It begins from the moment we lay our head down on our pillow, and continues throughout the night as we toss and turn. After a couple hours, the chain reaction begins and a rat’s nest is formed into our hair the second our morning alarm goes off. For most, the solution to bed head is a simple shower. However, not everyone has the time to take showers in the morning. A majority of men and women take their showers the night before. For both sexes, washing your hair the previous night only enhances the likelihood of waking up with severe bed head. Males are often left in the dark when it comes to finding a cure for this morning ritual. Women on the other hand have already figured out a solution to this bed head problem, it is called The Chi Flat Iron. Now it is time for men to realize the benefits this tool can have for them as well. The Chi Flat Iron is a high-end salon model hair straightener that can turn the most brutal bed head into a work of art. Made in the USA, the Chi brand is designed by Farouk Hair Care Systems, a pioneer in the hair care industry. Farouk prides themselves on their ability to make quality hair care products utilizing some of the best technology available. The Chi Flat Iron is a prime example of one of their lines of hair......

Words: 1826 - Pages: 8

Study on Iron Ore Slags

...2007:224 CIV M ASTER’S TH E SI S Study of the reactions between iron ore slag and refractories Julien Zimmermann MSc PrograMMeS in engineering Materials Technology (eeigM) Luleå University of Technology Department of Applied Physics and Mechanical Engineering Division of Material Mechanics 2007:224 CIV • ISSN: 1402 - 1617 • ISRN: LTU - EX - - 07/224 - - SE Summary: For the fabrication of iron ore pellets at LKAB (Luossavaara-Kiirunavaara AB), one of the methods used is to sinter the pellets in a rotary kiln. This Kiln has a drift temperature of 1250°C in average. During this process a coating, causing the wear of the refractories materials, is formed, inducing expensive maintenance periods. The aim of this work is to find the reaction that takes place between the Slag and the bricks, in order to find the parameters that have to be changed to improve the bricks lifetime in the kiln. The use of bricks with higher alumina content is one of the solutions, but it is expensive. The influence of Alkalis and especially Na2O has been studied before in inert atmosphere. In this work it will be studied in air as well as the influence of the alumina content of the brick. Experiments were performed in air atmosphere, using powder samples that have been compressed into pellets. The devices used to characterize the reaction and the product of the reaction were: Kanthal furnace, X-ray diffraction (XRD), dilatometer, differential scanning calorimetry and thermogravimetry......

Words: 20108 - Pages: 81

World Id Flat

...E. Stiglitz wrote in The New new York Times reviewing The World Is Flat in 2005. In this edition, Thomas L. Friedman includes fresh stories and insights to help us understand the flattening of the world. Weaving new information into his overall thesis, and answer­ ing the questions he has been most frequently asked by parents across the country, this third edition also includes two new chapters—on how to be a political activist and social entrepreneur in a flat world; and on the more troubling question of how to manage our rep­ utations and privacy in a world where w e are all becoming publishers and public figures. The World Is Flat 3.0 is an essential update on globalization, its opportunities for individual e m p o w e r m e n t , its achievements at lifting millions out of poverty, and its drawbacks—environmental, social, and political, powerfully illuminated by the Pulitzer P r i z e - w i n n i n g author of The Lexus and the Olive Tree. "This book showcases Friedman's gift for lucid dissections of abstruse economic phenomena, his teacher's head, his preacher's heart, his genius for trend-spotting." — W A R R E N B A S S . THE WASHINGTON POST "Nicely sums up the explosion of digital-technology advances during the past fifteen years and places the phenomenon in its global context." - P A U L MAGNUSSON. BUSINESSWEEK "[This book's] insight is true and deeply important.... The metaphor of a flat world, used by Friedman to describe the next phase of......

Words: 263079 - Pages: 1053

Iron Works

...change only occurs when chemical bonds are broken, formed, or both. When matter is in the solid state, the particles (atoms or molecules) that make up the matter are very close together. These particles can vibrate around fixed positions in space. A solid is characterized by having a fixed shape and a fixed volume. If the temperature of the solid was raised, at a given temperature, the solid would melt and become a liquid. When a solid melts, the particles that make up the solid gain enough energy so that they can move relative to each other and no longer occupy fixed positions. However, they are still relatively close to each other. Since the particles can move, a liquid is characterized by having a fixed volume but no fixed shape. A liquid will occupy the shape of whatever container it is placed in. If a liquid is heated, the temperature will rise. The particles of the liquid will move faster as the temperature rises. At the boiling point, the particles gain enough energy so they can move independently of each other, and the liquid is converted to a gas. Since the particles in a gas can move independently of each other, a gas has no fixed volume or shape. A gas will occupy the volume and shape of whatever container it is placed in. If the temperature were continued to be raised, at very high temperatures, the molecules would be dissociated into atoms, and the atoms would be stripped of their electrons. What would remain would be a mixture of electrons and......

Words: 5393 - Pages: 22

Gopal Iron

...Gopal Iron & Steels co. (Gujarat) Ltd. -A Managerial View A Report by:- Mohak Bhandari, Sambhav Jain, Harsh Patel, Bharat Gabra Table of Content SR.NO | Particulars | Page. no | 1 | Company Overview | 3 | 2 | Industry Overview | 4 | 3 | Company Details | 6 | 4 | Shareholding Pattern | 7 | 5 | Financial History | 8 | 6 | Management Practices | 9 | 7 | Operation Management | 10 | 8 | Process | 11 | 9 | Management | 12 | 10 | Labor Response | 13 | 11 | Globalization Responses | 14 | 12 | Change and Innovation | 15 | 13 | Leadership | 16 | 14 | PESTLE Analysis | 17 | 15 | Conclusion | 18 | Company overview Gopal Iron & Steels Co. (Gujarat) Limited (GISCO) is established in the year 1994. We are a leading manufacturer of Structural Steels, Bars and ERW Tube / Pipes in the state of Gujarat. Over the years, GISCO has been continuously upgrading with latest technology and infrastructure. GISCO has earned the status of preferred steel manufacturer for traders, customers, engineering, construction, infrastructure and other primary industry. Since its inception, as Gopal Rolling Mills Private Limited, the company has never looked back. Every year has brought enormous rewards not only in the form of revenues and records, but also in the form of continuously growing customer base. The company was converted into a Public Limited Company in the year 1995 and since then it is known as Gopal Iron & Steels Co. (Gujarat)......

Words: 3366 - Pages: 14

Iron Iron Iton

...Measurement of Fe2+ in Iron Pills Redox Titration Purpose: You will prepare and standardize a potassium permanganate solution and use it to determine the amount of iron, specifically Fe2+, in iron pills. Overview: Titration is the volumetric measurement of a solution of known concentration when it reacts completely with a measured volume or mass of another substance. In the first part of this experiment, the potassium permanganate solution, the titrant, is standardized, by quantitatively reacting it with iron (II) ammonium sulfate hexahydrate, Fe(NH4)2(SO4)2•6H2O (abbreviated FAS). The second part of the lab uses the standardized potassium permanganate to determine the amount of the analyte, also iron (II), in iron supplement pills. In this experiment, a purple-colored solution of potassium permanganate, KMnO4, with an approximate concentration of 0.02 M will be added to solutions containing Fe2+ ions. In redox titration the chemical reaction is an oxidation-reduction reaction with electrons transferred from one species to another. The total number of electrons lost in the oxidation half-reaction is equal to the total number of electrons gained in the reduction half-reaction. The permanganate ion, MnO4-, is a strong oxidizing agent which causes the Fe2+ to be oxidized to Fe3+ ions. The manganese gains five electrons and is reduced from a 7+ oxidation state in the permanganate ion to form colorless Mn2+ ions. The Fe2+ loses one electron as it is oxidized to......

Words: 1213 - Pages: 5

Density of Iron

...Aim – To find out the density of iron. Method – * Take different number of iron nails. i.e. 15, 30, 45, 60, 75. * Measure and record the volume for the different number of nails, by immersing the nails into water, and recording the displacement. * Measure and record the mass of the different number of nails using a balance. * By using the formula Density = Mass/ Volume calculate the density of the iron nails. * Note this information in a lab report… Apparatus – * Measuring Cylinder * Balance * Iron Nails * Water (5cm^3 as initial volume) * Tissue Paper Independent Variable –Volume Dependent Variable – Mass Controlled Variables – Initial volume of water and iron nails. Modifications to the experiment – I noticed while immersing 60 and 75 nails into the measuring cylinder, some nails could not fit and were above the water level. Hence to calculate the volume for these many number of nails, the initial volume was changed from 5cm^3 to 6cm^3. Then I measured the change in displacement to find the volume. Raw data table – Number of Nails | Mass of Nails/g ±0.10 | Volume of Nails/cm^3±0.10 | | Trial 1 | Trial 2 | Trial 1 | Trial 2 | 15 | 3.90 | 4.10 | 0.50 | 0.50 | 30 | 7.90 | 8.103 | 1.00 | 1.00 | 45 | 11.70 | 12.05 | 1.70 | 1.55 | 60 | 15.75 | 15.95 | 2.95 | 2.80 | 75 | 19.80 | 19.70 | 3.55 | 3.70 | Qualitative Observations – * When I kept 15 nails in a measuring cylinder which had 5cm^3 of water, the water......

Words: 1179 - Pages: 5

Pumping Iron

...Pumping Iron at Cliffs & Associates The Circored Iron Ore Reduction Plant in Trinidad 09/2004-5041 This case was written by Christoph H. Loch, Professor of Technology Management at INSEAD, and Christian Terwiesch, Associate Professor of Operations Management at the Wharton School, as a basis for class discussion rather than to illustrate either effective or ineffective handling of an administrative situation. Copyright © 2002 INSEAD-Wharton, France/USA. Revised Version, copyright © 2004 INSEAD-Wharton, France/USA. N.B. PLEASE PERMISSION. NOTE THAT DETAILS OF ORDERING INSEAD CASES ARE FOUND ON THE BACK COVER. COPIES MAY NOT BE MADE WITHOUT 1 5041 “There are worse places in the world to be in December than Trinidad,” thought Ed Dowling, as he spotted the first white beaches from his seat on the Miami-Trinidad flight. “Look, Steve, we are flying close by our plant,” he said to Steve Elmquist, pointing at a significant landmark on the coastline below them (see Exhibit 1). Dowling was executive vice-president for operations at Cleveland Cliffs Inc., and Elmquist was the general manager of Cliffs and Associates Ltd. (CAL), which was co-owned by Cleveland Cliffs and Lurgi Metallurgie GmbH, the German process technology company, following a recent joint venture. Neither had said much since starting their journey some eight hours before in Cleveland, Ohio, where they had reported to the board members of Cleveland Cliffs on the status......

Words: 5457 - Pages: 22

Pumping Iron

...Pumping Iron at Cliffs & Associates The Circored Iron Ore Reduction Plant in Trinidad 09/2004-5041 This case was written by Christoph H. Loch, Professor of Technology Management at INSEAD, and Christian Terwiesch, Associate Professor of Operations Management at the Wharton School, as a basis for class discussion rather than to illustrate either effective or ineffective handling of an administrative situation. Copyright © 2002 INSEAD-Wharton, France/USA. Revised Version, copyright © 2004 INSEAD-Wharton, France/USA. N.B. PLEASE PERMISSION. NOTE THAT DETAILS OF ORDERING INSEAD CASES ARE FOUND ON THE BACK COVER. COPIES MAY NOT BE MADE WITHOUT 1 5041 “There are worse places in the world to be in December than Trinidad,” thought Ed Dowling, as he spotted the first white beaches from his seat on the Miami-Trinidad flight. “Look, Steve, we are flying close by our plant,” he said to Steve Elmquist, pointing at a significant landmark on the coastline below them (see Exhibit 1). Dowling was executive vice-president for operations at Cleveland Cliffs Inc., and Elmquist was the general manager of Cliffs and Associates Ltd. (CAL), which was co-owned by Cleveland Cliffs and Lurgi Metallurgie GmbH, the German process technology company, following a recent joint venture. Neither had said much since starting their journey some eight hours before in Cleveland, Ohio, where they had reported to the board members of Cleveland Cliffs on the status......

Words: 5457 - Pages: 22

Electrical Electronics

...UNIVERSITY OF KERALA B. TECH DEGREE COURSE 2008 SCHEME ELECTRICAL AND ELECTRONICS ENGINEERING I to VIII SEMESTER SCHEME AND SYLLABUS BOARD OF STUDIES IN ENGINEERING AND FACULTY OF ENGINEERING AND TECHNOLOGY UNIVERSITY OF KERALA B.Tech Degree Course – 2008 Scheme REGULATIONS 1. Conditions for Admission Candidates for admission to the B.Tech degree course shall be required to have passed the Higher Secondary Examination, Kerala or 12th Standard V.H.S.E., C.B.S.E., I.S.C. or any examination accepted by the university as equivalent thereto obtaining not less than 50% in Mathematics and 50% in Mathematics, Physics and Chemistry/ Bio- technology/ Computer Science/ Biology put together, or a diploma in Engineering awarded by the Board of Technical Education, Kerala or an examination recognized as equivalent thereto after undergoing an institutional course of at least three years securing a minimum of 50 % marks in the final diploma examination subject to the usual concessions allowed for backward classes and other communities as specified from time to time. 2. Duration of the course i) The course for the B.Tech Degree shall extend over a period of four academic years comprising of eight semesters. The first and second semester shall be combined and each semester from third semester onwards shall cover the groups of subjects as given in the curriculum and scheme of examination ii) Each semester shall ordinarily comprise of not less than 400 working periods each of 60......

Words: 36386 - Pages: 146

Non Conventional Energy Resources

...INTERMEDIATE VOCATIONAL COURSE Second Year NON-CONVENTIONAL ENERGY SOURCES For the Course of Rural Engineering Technician State Institute of Vocational Education Directorate of Intermediate Education Govt. of Andhra Pradesh, Hyderabad. 2005 Author Sri Shali Habibulla M.Tech (Ref & A/c), Hons. C.H.E. M.I.S.T.E. Department of Rural Engineering Technician Govt. Junior College (Boys) New, Town, ANANTAPUR - 515 001. Editor Sri K. Jagadish Junior Lecturer in R.E.T. Govt. Junior College Vmedugula - 531027. Vizag (Dist.) PREFACE The main objective of vocational education is to train the students at +2 level for meeting the demands for the skilled manpower in both organised and unorganised sectors and also to provide an alternative channel for those who aimlessly persue higher education and to prepare them for self reliance. The State Institute of Vocational Education (SIVE) in collaboration with the Board of Intermediate Education, Andhra Pradesh has developed curriculum for 43 vocational courses in the field of Engineering & Technology Agriculture Health & Paramedical Business & Commerce Home Science and Humanities Accordingly the text books have been developed by SIVE as per the restructured curriculum by utilizing the services of various professional teachers in the respective fields. I am sure that this book will be immensely useful to the vocational students and teachers in understanding the concepts. I wish to place my sincere thanks on......

Words: 19574 - Pages: 79

Iron and S

...teelIRON AND STEEL INDUSTRY IN INDIA Corporate Catalyst India A report on Indian Iron and Steel Industry OVERVIEW 1.1 Background The Indian iron and steel industry is nearly a century old, with Tata Iron & Steel Co (Tata Steel) as the first integrated steel plant to be set up in 1907. It was the first core sector to be completely freed from the licensing regime (in 1990-91) and the pricing and distribution controls. The steel industry is expanding worldwide. For a number of years it has been benefiting from the exceptionally buoyant Asian economies (mainly India and China). The economic modernization processes in these countries are driving the sharp rise in demand for steel. The New Industrial policy adopted by the Government of India has opened up the iron and steel sector for private investment by removing it from the list of industries reserved for public sector and exempting it from compulsory licensing. Imports of foreign technology as well as foreign direct investment are freely permitted up to certain limits under an automatic route. This, along with the other initiatives taken by the Government has given a definite impetus for entry, participation and growth of the private sector in the steel industry. While the existing units are being modernized/expanded, a large number of new/greenfield steel plants have also come up in different parts of the country based on modern, cost effective, state of-the-art technologies. Soaring demand by sectors like......

Words: 6032 - Pages: 25

The Screen Saver

...The Screen Saver In “The Screen Saver,” the theme of religion in the workplace is addressed. The following document will answer five questions: 1) Who is affected? 2) What are the likely consequences? 3) Are there any rights or duties at stake? 4) What principles are involved? and, 5) What are the implications for the characters? Lastly, the case will be examined through the lens of an HR practitioner; specifically, how to best resolve the given situation will be discussed. 1) Who is affected? Ed Harrison, his staff—specifically John Blank, the Jewish employees and the Christian employees particularly, and the HR person or department. As the owner of the agency, Ed Harrison is affected. Due to the small size of the firm, he will ultimately be involved in the incident between Blank and the born-again Christian. If the company had been bigger, Harrison may not have heard about this issue if it was resolved through HR or another party. John Blank is clearly affected as he is offended by the religious screen saver of another employee. He claims that the other Jewish employees are also offended—though a first hand account from them is not provided. Consequently, Blank has spoken with the born-again Christian—and has not yet resolved the matter. Thus, this employee is now too affected. This can potentially lead to a clash between the religions 2) What are the likely consequences? Though a discussion of how HR should handle this scenario will be followed shortly,......

Words: 617 - Pages: 3

A Streetcar Named Desire | Les Heures Retrouvées | Julia Wieniawa-Narkiewicz